Obd2 scanner position. Rotate the ignition back to the &quot

Ways to Reset the ECU on a Ford Contour 1Place the Contour's transmission in park (automatic transmission) or 1st gear (manual transmission). Engage the emergency brake and turn the ignition for the "Off" position. Rotate the ignition back to the "On" position but do not start off the engine.

2Plug the scan tool's data cable in to the Contour's diagnostic data port, underneath the dashboard just above the pedal location. Turn on the scan tool and allow it to start up.3Follow the guidelines on the scan tool's screen to enter engine and transmission facts.4Choose " Obd2 scanner;ECU" from the primary menu.

Pick "Codes" and "Clear all existing and stored DTCs." Wait for the scan tool to indicate that the codes have been cleared.5Unplug the tool's data cable from the diagnostic information port diagnostics car tool. Start the engine and ensure that the service engine light is just not illuminated.