How you can Pull Computer system Codes for a Toyota Previa 1Find a port on the driver's side with the car close to the steering column. This port looks the same as the connective finish on the OBD code scanner auto diagnostics software.
Plug the OBD code scanner in to the port.2Put the essential in to the ignition and turn it for the "II" position, taking care not to begin the engine. This need to energy in your scanner. If not, uncover an "on/off" switch on the scanner and press it on.3Select the "Retrieve Codes" command on the scanner.
Wait for the scanner to show you the difficulty codes and write them down on a piece of paper. Appear up these alphanumeric codes inside the scanner's manual Vehicle Diagnostic equipment.4Unplug the OBD code scanner from the port. Take the Previa to become serviced or repaired according to the difficulty codes you retrieved.
没有评论:
发表评论