The way to Reset a Ford Focus Computer 1Sit inside the driver's seat and eliminate the dust cover from the diagnostic port located just below the dashboard amongst the steering column and also the center console diagnostics car tool.
2Plug the scan tool's datalink cable into the diagnostic port. Turn the ignition for the run position.3Follow your scan tool's specific operating guidelines to perform a speedy test on the energy train handle module.4When prompted to erase the diagnostic trouble codes, do so.
5Complete the speedy test auto diagnostic software. Disconnect the datalink cable from the port and place the dust cap more than the port.
Related articles:
没有评论:
发表评论